Cdlogo  
Cdlogo
30 Selhurst Road, South Norwood, London SE25 5QF

Tel: 020 8683 1126 Fax: 020 8689 7896 info@cableductuk.com

             
  Floor box Overview  
       
  Outlet Plates (all ranges)  
  2000 Series  
  500 Series  
  700 Series  
  700 Round  
    Minima  
  700 series options  
       
  Interactive floor box chooser  
  Floor Trunking  
  Skirting & Dado
 
  Surface Trunking
 
  Lighting Trunking  
  Service Poles
 
  Bench Trunking  
  Pedestal Boxes  
    Specifiers guides and downloads  
     
  Bespoke Products
 
    Recent Projects  
 
Minima

The most prestigious floor box available. Made from brass or stainless steel, with solid cast outlet flap and handle to match. Uniquley, the outlet flap and handle are completely flush with top of the box, and are spring closed.

Patent applied for GB1721965.0

It can accept an infill of any thickness, be it stone, marble, timber, ceramic or carpet. Available with or without a trim flange. Available brushed satin or polished finish. Suitable for cavity or screed floors of 65mm or more.

Please see our "options" page to explain the many product variations in more detail.

Please note that this box is not suitable for wet washing. We do offer a version that is IP65 rated when not in use (patent applied for GB1721965.0). This box must have the sealing plate in place to achieve IP65 rating.

Any size, Any finish

-

Standard sizes available, but can be made to site specific measurements

-

Available with either brass or stainless steel lid and frame, with matching solid cast outlet flap

-

lid recess made to suit flooring thickness

- also available with a flat lid
Supplied brushed as standard. Can also be supplied mirror polished
We can vary the lid recess to suit ANY infill, specify on ordering
We can vary the size to fit ANY service, even the MK commando
We can vary the inner frame to give ANY plug top space
We can vary the depth and connections to suit ANY floor requirement
Can be increased in strength to withstand a safety factor load of 9KN

Supplied as standard without trim flange

Trim sometimes required for wood floors to fill expansion gap, please specify when ordering

Supplied with height adjustable inner frame for on site leveling

Self closing, sold cast outlet flap, designed to open automatically when cables present, patent applied for GB1721965.0

Solid cast handle for easy opening

With lock if required

:

Please note that we recommend a minimum depth of 85mm for all Audio Visual applications, with the 120mm deep boxes preferred as having 69mm plug top space and 30-45mm wiring space depending on floor finish in lid

Please advise on order if flange reuqired on frame, or no flange required on base box.

Standard sizes (others to order):
Sbox: Comp Depth Frame Size
MS6† 1 65mm 150x150mm
MS8† 1 85mm 150x150mm
MS2† 1 120mm 150x150mm
M16 1 65mm 250x148mm
M18 1 85mm 250x148mm
M12 1 120mm 250x148mm
M26 2 65mm 233x250mm
M28 2 85mm 233x250mm
M22 2 120mm 233x250mm
MM6† 2 65mm 200x200mm
MM8† 2 85mm 200x200mm
MM2† 2 120mm 200x200mm
M36 3 65mm 320x250mm
M38 3 85mm 320x250mm
M32 3 120mm 320x250mm
M06 3 65mm 300x300mm
M08 3 85mm 300x300mm
M02 3 120mm 300x300mm
M46 4 65mm 407x250mm
M48 4 85mm 407x250mm
M42 4 120mm 407x250mm
brass mirror outlet flap
3-4 comp 2 flaps satin stainless

3-4 comp 2 flaps mirror stainless (trim flange)

stainless steel outlet flap
stainless steel outlet flap
3-4 comp 2 flaps satin brass
1-2 comp 1 flap mirror brass
stainless steel outlet flap

Standard finish supplied is satin stainless steel or brass.

Boxes are also available with a Mirror polished flap and handle, or total Mirror finish.

Standard finish - no trim

Note: All stainless steel & brass lids and frames are made to suit your floor. Please specify lid recess when ordering, also if you want a brass or stainless steel finish. Frames come as standard without a trim flange. They can be supplied on request.

Flaps and trim frames can be supplied in a mirror polished finish.

As supplied with trim

We hold a large number of standard bases in stock, with a lead time of a few days to be ready for wiring. Please note that the tops are made to order and are typically available in a few weeks.

As standard these boxes are designed to lay within a base box fitted to the sub floor. Note that the base box of a standard install box is 10mm larger than the frame size stated above. Therefore, if the floor finish is already down we suggest a RETRO type base box that fits within the cut out size required for the stainless or brass trim frame. Please tell the sales team if your finished floor is already fitted. A minimum of 75mm is required from the top of the finished floor to the bottom of the sub floor. This method can also be used for replacing existing floor boxes without re-wiring. All base boxes are suitable for installation into cavity or screed floors.

A small selection of available plates is shown below. For others, including non-standard, 5amp sockets, and RCD protected sockets please click here . Also available is a CAT6 compatible angled date plate, for use with boxes of 85mm or deeper, to allow 50mm bend radius.

Standard plates are made from grey plastisol with white socket interiors. Stainless steel or brass plates, and black or red socket interiors are also available.

To increase available plug top space, either the plate can be dished (affecting single plate only), or the galvanised inner frame can be increased in height (affecting all plates)

Ref 501 Blank plate

Ref 554*

Twin switched socket (561 & 562 RCD TSSO)
Ref 554-USB

NEW Twin 13 A and USB charger (>= 85 only)

Ref 576

Two 5 amp sockets

Ref 577 Twin 13A and Single 5 amp socket
Ref 558 Two 1 gang accessories
Ref 559 Two 50x50 outlets to suit Euromod modules. See Audio Visual for further information
Ref 561 Twin 13A RCD auto reset (>= 85 only)
Ref 586 One 2 gang accessory
Ref 591 4 RJ45/LJ6C cutouts 22.4x36.4mm (Modsnap, Hellerman Tyson) (Ref 556 2 cutouts)
Ref 575 1 x SSO and 1 x 1gang
Ref 593 4 x Angled data plate 22.4x36.4mm
Ref 588 Triple switched socket
Ref 590 Triple un-switched socket

* Note our socket plates are off centre, so that when multiple socket plates are used they should be installed facing each other so that the plug tops are staggered when in use.

** Note that we are aware of a problem of some high-powered radio systems interfering with RCD sockets.

   

Any installations using such systems should contact the Contactum Techical department on 020 8208 7414

† See plates for the 7RS box to suit the 7S 150x150mm, and plates for 7RO box to suit the 7M 200x200mm

   
Calender

Outlet plates

Download specifiers and buyers guide
Installation guide
Adaptable to any situation
For boxes being fitted AFTER the flooring has been put down please call for our RETRO fitting box options
IP65 rated box now available. Please speak to our sales staff.
Please click HERE to have the plethora of options explained in further detail

Pictures of a variety of finishes

Lockable lids available

Now available with a bronze surface finish

Loading test certificate for the 700+ extra strength version of the box

The most prestigious box for the most prestigious location
 

Cableduct Limited, Manufacturer's of the largest range of Standard cable management products, including: Floor boxes; screed floor box, cavity floor box, screed floor boxes, cavity floor boxes, service outlet boxes, Screed floor boxes; in screed outlet box; Stainless steel floor box; brass floor box; stainless steel outlet box; brass outlet box; round stainless steel floor box; round brass floor box; screed trunking; underfloor trunking; surface trunking; dado and skirting trunking; pedestal boxes; service poles London