Cableduct Limited - 700 Series Stainless Steel and Brass floor box.

700 SERIES

Available in stainless steel, brass or bronze. Made with solid cast outlet flaps and handle. It can accept an infill of any thickness, be it stone, marble, timber, ceramic or carpet. Suitable for cavity or screed floors of 65mm or more

Give us a call on | Tel: 020 8683 1126
Send us an email | Email Us

700 SERIES INTERACTIVE CHOOSER

Use this interactive chooser to quickly find information on a specific model in the standard range, or see below for full range information and bespoke options. Once you have chosen an option please contact us to ensure that all site issues have been considered and the product will work for you.

700 Series floor box

The most prestigious floor box available. Standard finishes are available in brass or stainless steel. It can uniquely accept an in fill of any thickness.

SPECIFICATIONS

Detailed information about the 700 series.

Stocked sizes are listed below. Any can be made to order

rectangular
Sbox:	Comp	Depth	Frame Size
716	1	65mm	250x148mm
718	1	85mm	250x148mm
712	1	120mm	250x148mm
726	2	65mm	233x250mm
728	2	85mm	233x250mm
722	2	120mm	233x250mm
736	3	65mm	320x250mm
738	3	85mm	320x250mm
732	3	120mm	320x250mm
746	4	65mm	407x250mm
748	4	85mm	407x250mm
742	4	120mm	407x250mm

square
Sbox:	Comp	Depth	Frame Size
7S6	1*	65mm	150x150mm
7S8	1*	85mm	150x150mm
7S2	1*	120mm	150x150mm
7M6	2	65mm	200x200mm
7M8	2	85mm	200x200mm
7M2	2	120mm	200x200mm
706	3	65mm	300x300mm
708	3	85mm	300x300mm
702	3	120mm	300x300mm

*Only fits a single socket

Please note that the minimum overall base to FFL is 80mm.

Round
Sbox	Comp	Depth	Frame size
7RS-65	1*	65mm	150x150mm
7RS-85	1*	85mm	150x150mm
7RS-120	1*	120mm	150x150mm
7RO-85	2	85mm	233x250mm
7RO-120	2	120mm	233x250mm
7RL-36	3	65mm	300x300mm
7RL-38	3	85mm	300x300mm
7RL-32	3	120mm	300x300mm

Note that all lids are made to order.

As standard with a recessed lid (to suit your floorcovering) Or with a flat lid

Standard recessed lid

Lid recess cross section

Optional flat lid

Optional extra strength

Loading test certificate for the 700+ extra strength version of the box

As standard, trimless frame

Optional trim flange

Trimless flush finish

Trim flange flush finish. Floor covering is either rebated or compressible

Trim flange proud finish. Lid and frame are 1.5mm proud of surrounding floor

Cableduct’s 700 Series has a solid cast outlet flap and handle in brass or stainless steel to match the lid.
All boxes are supplied as standard with a single satin polished outlet flap.

Standard satin polished flap

Option to remove logo

Optional mirror polished flap

Additional flap (Minima recommended)

Option of bespoke flap

Optional grommet opening - see Grommets

Brush strip - image is Minima range with handle

Option of "mousehole"

Optional extra sealing methods:

Fitted with keyed cam lock

Screw fixed

IP65 Sealed when not in used

IP65 Sealed when not in used
Patent applied for GB2574175

Common finishes in stainless steel, brass or bronze*.

Satin polished stainless steel

Mirror polished stainless steel

Satin polished brass

Mirror polished brass

Standard antique bronze

Optional antique brass

Optional jordan bronze

*Bronze options are available as a surface finish on top of the brass substate, and are not recommanded for areas of high traffic.

Our common plates are shown below.
Others are available to order

SBOX-501
Blank plate

SBOX-554-USB
Twin switched 13A & 2A USB

SBOX-554
Twin switched 13A

SBOX-558
Two standard 1 gang apertures

SBOX-559
Two Euromod 50*50 apertures

SBOX-561
Twin 13A with RCD

SBOX-575
One standard 1 gang & 1 * 13A

SBOX-576
Two 5A sockets

SBOX-577
Twin 13A & single 5A

SBOX-578
Single 13A & 50*50 Euromod

SBOX-586
One standard two gang aperture

SBOX-586D
One dished 2 gang aperture

SBOX-588
Three switched 13A

SBOX-590
Three unswitched 13A

SBOX-591
Four LJ6C apertures

SBOX-593
Four LJ6C apertures angled

Common plates shown below

SBOX-7RS01
Blank plate

SBOX-7RS-75W
Single switched 13A

SBOX-7RS-5AMP
Single 5A

SBOX-7RS-59
Single 50*50 Euromod aperture

SBOX-7RS-USB
Single 13A & 2A USB

SBOX-7RS-91
Two LJ6C apertures

Common plates are shown below

SBOX-7R001 Blank Plate

SBOX-7R054 Twin switched 13A

SBOX-7R076 Two single 5A sockets

SBOX-7R059 Two 50*50 Euromod apertures

SBOX-7R091 Four LJ6C apertures

SBOX-7R061 Twin 13A with RCD

CAVITY FLOOR INSTALLATION

Cut a hole in the sub-floor 10mm larger than the box stated frame size. For example, an SBOX-738 is frame size 320x250mm and should have a 330x260mm cut out.
Attach conduit connections as required
Put the galvanised outer box into the cut out. Secure using screws through the top flange.

SCREED INSTALLATION

Locate floor Boxes as required ideally on a flat ribbon of screed
For trunking installation, attach clamp plate if not already supplied and fit trunking bodies in between, cut to length as required
Install wires
For trunking install put on lids and secure top clamps
Lay screed to top of base, covering the box to prevent ingress

The height adjustable inner frame is the same size as the top frame. It provides vertical adjustment for perfect on site levelling. The outlet plates mount on to this frame.

As standard, the 65mm and 85mm deep boxes have 28.5mm of space between the plate and the lid for plug tops.

As standard, the 120mm deep boxes have 68.5mm of space giving additional space if audio visual plugs or transformers are to be used.

Any size can be made to order.

Standard base box

The base box is 10mm larger than the top frame. The base is mounted on the sub-floor, and the final floor covering conceals the metal flange. The inner frame adjusts both up and down to give perfect levelling with the surrounding floor.

Optional retro style base

If the finished floor is already laid, the retro style box allows a hole to be made to exactly fit the top frame. The base must be site fixed. Only upward adjustment is possible.