Christmas hours – we will be closed from Midday 23rd December to 08.30 2nd January. We would like to thank all our customers for their continued support in 2024 and wish everyone a Merry Christmas and Happy New Year!
Robust, Comprehensive, Rapid and Easy installation.
When it isn’t possible to hide cables and wires underneath flooring or in wall and ceiling recesses, surface trunking is the perfect solution. Surface trunking is installed directly onto a wall, floor, or ceiling to contain unsightly wires and to prevent trip hazards. It is fully customisable and available in any size.
Contact Us
Accessories
Browse our fully compatible accessories (with references) ranging from 50mm x 50mm to 300mm x 150mm
Body and lid (2m length) – standard Body: C20; Lid: C20L
Body and lid (2m length) - multiple compartments (C20Y2)
Gasket for weatherproof seal - E-type
Top gusset bend (C21)
Top gusset tee (C24)
Top gusset cross (C27)
Flange tee (C28)
Top square bend (C32)
Top square tee (C33)
End cap (C38)
Terminating flange end (C42)
Top 45 deg. Bend (C44)
Inside 45 deg. Bend (C45)
Outside 45 deg. Bend (C46)
Outside square bend (C47)
Inside square bend (C48)
Inside gusset bend (C60)
Outside gusset bend (C61)
Downloads
Click on the boxes below to access our extensive range of downloadable resources. From brochures and floor box specifications to installation guides and conformity data sheets, all our downloads are completely free to all Cableduct customers.
If you’ve got a particular question for the experts at Cableduct, it’s highly likely that you’re not the first person to ask this. Have a read of our frequently asked questions to see if you can find the answer to the information that you require.
Can't see the answer you're looking for?
Call 020 8683 1126Flush floor is level with the top of the screed and can contain floor boxes along the trunking run (usually 2000 Series floor boxes). Underfloor in-screed is buried in the screed.
The trunking acts as the base box of the floor box, you’re only putting a plug top and 6mm lid on the trunking. The cables run under the outlet plates.
A good start point is to see the relevant datasheet and installation guide and send us a “shopping list” of lengths/bends/end caps/tees that you want, with quantities.
You can install a floor box with underfloor trunking if the trunking is at least 55mm deep. The type of floor box will differ depending on the exact situation. Please ask our technical team for their advice
Skirting runs around the edge of the wall at floor level whereas dado does the same but at waist height. Options are available for square or chamfered top and bottom. Finish is galvanised steel, pre-painted white or stainless steel.
Our Trunking is supplied with enough fixings and accessories for standard installations. Projects can vary and so please discuss details of your project with our team. Fixings and installations information is available in Downloads/Trunking